
common building is defined as: the walls of the
structure(s) are physically connected and the
structure(s) share a single ground reference
For more details and helpful cabling information,
reference the white paper titled Cabling for Success
with DXLink, or contact your AMX representative
Supports full matrix switching, video processing and
scaling of 8 bit per color standard Input video
Analog Audio Input Connections
(2) female 1/8” stereo mini-phono jacks; support
unbalanced audio
(4) 3.5 mm 5-position captive-wire terminals; support
balanced (differential) or unbalanced (single-ended)
stereo audio
+4 dBu (1.228 Vrms) balanced or -10 dBV (0.3162
Vrms) unbalanced
>17 kOhms balanced, >10 kOhms unbalanced
Analog Audio Output Connections
DVX-3156HD-SP (FG1905-22):
(1) Amplified audio output; 4-position captive wire
connector; supports amplified, variable, mono or
stereo audio
(3) Line level audio output; supports balanced or
unbalanced mono or stereo
DVX-3156HD-T (FG1905-24):
(1) Amplified audio output; 2-position captive wire
connectors; supports 70V or 100V mono audio –
connect a speaker to either but not both
simultaneously
(3) Line level audio output; supports balanced or
unbalanced mono or stereo
-100 dB to +0 dB in 1 dB steps
20 steps each left and right
Balanced Line Inputs: -98 dB @ 0 dBV, 20 Hz to 20 KHz
Unbalanced Line Inputs: -70 dB @0 dBV, 20 Hz to 20
KHz
AMP: 20 Hz to 20 kHz ±0.75 dB @ 8 Ohms
Line: 20 Hz to 20 kHz ±0.1 dB
Independent Compression per input
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Compression Ratio: 1 to 20
Threshold: -60 to 0 dB
Audio Input Gain Compensation
-24 dB to +24 dB, 1 dB steps
10-band parametric EQ with variable center frequency,
filter type and Q per band
Center Frequency: 20 to 20K Hz
EQ Gain: -12 to +12 dB
Q: 0.1 to 20
Filter Types: Bell, Base Shelving, Treble Shelving, Low
Pass, High Pass, Band Pass, Band Stop
AMP: 85 dB @ 8 Ohms, full output, 1 kHz A-weighted
Kommentare zu diesen Handbüchern