AMX RE-DM4 Spezifikationen PDF herunterladen (Seite 56)

Appendix A: AMX Lighting Curves

RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules

Economical Dimming Curve (2)

Similar to Curve 1, Curve 2 rolls off at 90% of the top end or about 105 volts maximum. FIG. 44 shows

a curve that reduces the maximum output to 90% of maximum to conserve energy. It is also called the

'energy saving curve'.

zRelay turn on level = 1%

zDimming Range = 0 - 114 VAC.

FIG. 46 shows the low-voltage output of the RDM-HDC module. The voltage range is from 0 to 9 VDC

when attached to test ballast. This curve can be used with 0-10 VDC dimming ballasts.

FIG. 44 Curve 2 at 120V AC

FIG. 45 Curve 2 at 240 VAC

FIG. 46 Curve 2 voltage output in volts DC

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

RADIA Eclipse 1
Table of Contents 3
Suggested Loads 9
Line-In Connections 10
Lighting Application Drawings 10
Overview 12
Specifications 13
Suggested Installation Loads 14
AMX Lighting Systems 17
RDA-DIV Radia Module Divider 19
Installation 21
LEFT SIDE FRONT RIGHT SIDE 22
Enclosure Dimensions 23
SIDE VIEW 23
RDA-ENC6B 23
TOP VIEW 23
Ground (green) Ground (green) 25
Hot (black) 25
Neutral (white) Hot (black) 25
Neutral (white) 25
1 2a 2b 3 28
Low-Voltage Connections 31
Green status LED indicator 32
AXLink wall panel 33
External Modules 34
Connecting dry closures 35
Failsafe Input 35
Emergency Input 35
Default Presets 36
Lighting System Link 37
Main Lighting System Page 38
Device Configuration Page 39
FIG. 32 Accept button 40
FIG. 33 Presets section 40
Preset Configuration Page 41
FIG. 35 New Preset button 42
AMX Lighting Programming 43
Preset Status 44
Meeting Mode 45
Presentation Mode 45
Setup commands 46
Recording commands 46
Status commands 46
Operation commands 46
FIG. 38 Sample dimming curve 47
FIG. 39 Basic dimming curve 50
Symbol Description 52
Standard Dimming Curve (1) 53
Economical Dimming Curve (2) 56
0-10VDC Curve (3) 57
Curve 3 output in volts DC 58
0-12VDC Curve (4) 59
Lutron FDB Curve (5) 60
FIG. 57 Curve 5 at 240 VAC 61
Advance Mark VII Curve (6) 62
12% Roll Off (7) 64
19% Roll Off (8) 66
33% Roll Off (9) 68
S-Curve #1 (A) 70
Log-Curve #1 (B) 72
Log-Curve #2 (C) 73
S-Curve #2 (D) 74
Curve D at 240 VAC 75
10% Off Curve (N) 76
Always OFF Curve (O) 77
Always ON Curve (F) 78
Curve R at 120 VAC 79
Curve R at 240 VAC 79
Curves 5 & B at 120 VAC 80
Curves 6 & C at 120 VAC 80
Curves A & D at 120 VAC 81
Curves A & D at 240 VAC 81
Default Low-end 82
Default Ramp Time 82
Channels 83
Channels (Cont.) 84
Protocol Conventions 84
Ramp Dimmers Up 85
Ramp Dimmers Down 86
Stop Ramping Dimmer 86
Ramp active preset up 87
Ramp Active Preset Down 87
Stop Ramping Preset 87
Recall Preset 88
Record Preset 88
Level Status 88
Set curve 89
Curve Status 89
Set Low End 89
Low End Status 90
Dimmer Status 90
Set Default Level Time 91
Set default preset time 91
Set Default Ramp Time 91
Ramp To Level 92
Undefine Dimmer 92
Phase Query 93
Version Query 93
Factory Default 93
Ramp preset up (NEW) 94
Ramp Preset Down (NEW) 95
Stop Ramping Preset (NEW) 95
Set Curve 96
Curve Status (NEW) 96
Set Low End (NEW) 96
Low End Status (NEW) 96
Reboot (NEW) 97
Set Default Preset Time 97
Ramp to Level 98
Undefine Dimmer (NEW) 98
Phase Query (NEW) 98
Testing AMX Lighting features 100
Troubleshooting hardware 101
Appendix C: Troubleshooting 102

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX RE-DM4 Spezifikationen Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrische Gehäuse AMX RE-DM4