AMX Current Sensors PCS Bedienungsanleitung PDF herunterladen (Seite 10)

TEK 1 Applications

V041908

TEKVOX, Inc. – 210.348.6565 –

www.tekvox.com San Antonio, TX 78232

IR Control

In some installations the display device only has IR control. For these types of installations the TEK 1 is not able

to communicate directly with the device. With a few add-on products the TEK 1 can monitor and control these

types of devices. Below are some suggested add-on type devices and how to use them with the TEK 1.

It may not be necessary to control the projector. The projector may already be controlled by an IR device. For

these installations all that is required is to determine if the projector is on or off by using only a power current

sensor.

By adding a power current sensor at the display device the TEK 1 can determine if the device is powered on.

Once the TEK 1 knows the device is on, the internal lamp and maintenance timers within the TEK 1 are

operable.

Power Current Sensor

• AMX PCS

• Display Devices PCS-02

To control the display device add a programmable RS-232 to IR. The TEK 1 can then be programmed to

communicate with the IR module.

Programmable RS-232 to IR module

• Xantech RS232IR Module

For security monitoring use the TekSecurity cable and connect the Security connection to a ground connection

on the display device.

Features

• Internal timers for Lamp, Maintenance, Monthly Usage, Total Usage and System Off

• Detects cut cables for device security (Reports by Email)

• Email Reports including Device Errors, Monthly Usage and Security Email

• Allows for IR only controlled devices

• Determines if the monitored device is actually powered on

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

AMX Current Sensors PCS Bedienungsanleitung Seite 10