AMX MVP-5100 Installationsanleitung PDF herunterladen (Seite 1)

Installation Guide

MVP-5100

5.2" Modero

ViewPoint

IR Touch Panel

Overview

The MVP-5100 Modero® Viewpoint® IR Touch Panel (FG5966-08) is a one-way

IR-emitting ergonomic device. The MVP-5100 utilizes a 5.2" Color Active LCD to

display a 800 x 480 pixel image with 262,144 colors, and communicates with IR

receivers via its integral IR emitter. For detailed installation, configuration,

programming, file transfer, and operating instructions refer to the MVP-5100

Modero ViewPoint Touch Panel Operation/Reference Guide, available online at

www.amx.com.

FCC Statement

This device complies with FCC Part 15 and Industry Canada RSS 210 subject to

the following conditions:

1. This device must not cause harmful interference and

2. This device must accept all interference, including interference that inter-

feres with the operation of this device.

Specifications

Table Charging Station Connector Locations

With the unit facing you, the mini-USB port (for programming and downloading

firmware) and the DC power jack are located on the lower left side of the device.

The connector for the Table Charging Station is located on the bottom of the

device.In cases where resetting the MVP-5100 is necessary or for access to the

Setup Pages, a recessed reset button is located on the top left, which can be

depressed using the included stylus.

WARNING: Transferring firmware KIT files over a direct USB connection

should only be done when the panel is connected to a power supply. If

battery power fails during a firmware upgrade, the panel flash file system

may become corrupted.

FIG. 1 MVP-5100 touch panel

MVP-5100 Specifications (FG5966-08)

Dimensions: 4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3

mm)

Weight: • 1.25 lbs (0.57 kg)

Power Requirements

(Without Charging):

Panel with battery fully charged or with no battery:

• Constant current draw: 0.3 A @ 12 VDC

• Startup current draw: 0.4 A @ 12 VDC

Power Requirements

(While Charging):

Panel while charging battery:

• Constant current draw: 1.1 A @ 12 VDC

• Startup current draw: 1.3 A @ 12 VDC

Minimum Power Supply

Required:

PS3.0 Power Supply (FG423-30) - both 120 VAC and 240

VAC models are shipped with this power supply.

Power Modes: • AWAKE: All necessary modules are powered up and

device remains online with the Netlinx Master.

• ASLEEP: Only the backlight will be turned off after the

user selectable time of inactivity has elapsed. Panel

resumes the Awake Mode in ~ 1 second upon a

momentary press of the touchscreen.

• PROCESSOR SHUTDOWN: Power to all peripherals

and components is turned off. The system remains in

this mode until it is rebooted. The panel is re-activated

by pressing the touchscreen and holding until the AMX

splash screen appears.

Battery Duration: • 2.5 days of normal use, in a combination of Awake and

Shutdown Modes.

• Six hours of continuous use (continuous Awake state).

Memory: • 128 MB Mobile DDRAM (upgrade not available)

• 256 MB NAND Flash (upgrade not available)

Touch Screen

IR Emitters

MVP-5100 Specifications (Cont.)

Screen Properties: • Screen resolution: 800 x 480 pixels (HV) @ 60 Hz frame

frequency

• Type: WVGA

• Aspect ratio: 16 x 9

• Brightness (luminance): 300 cd/m

• Channel transparency: 8-bit Alpha blending

• Contrast ratio: 400:1

• Display colors: 262,144 colors (18-bit color depth)

• Dot/pixel pitch: 0.23 mm

• Panel type: TFT Color Active-Matrix

External Components

Connector: 5-pin Mini-USB connector used for output to USB

programming, firmware update, and touch panel file

transfer between the PC and the target panel.

Note: When connecting the panel to PC using a CC-USB

(or compatible) cable, be sure to power the panel On

before attempting to connect the USB cable from the PC

to the mini-USB port on the panel.

DC Power Port: 2.5 mm port to power the panel away from a Charging

Station.

Internal Components:

IR Emitters: Transmit IR over 20 feet (6.10 m) from the panel.

• IR emitters on G4 panels share the device address

number of the panel.

• Transmits AMX fixed frequencies at 38KHz and 455KHz

and 8 user-programmable frequencies from 20KHz to

1.5MHz

Certifications: • FCC Part 15 Class B

•CE

• IEC/EN-60950

•RoHS

• Japan Approved

• Lithium polymer microbattery: UN/IATA

Operating/Storage

Environment

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

• Operating Humidity: 5% - 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% - 85% RH

Included Accessories: • Installation Guide (93-5966-01)

• PS3.0 Power Supply (FG423-30)

Other AMX Equipment: • MVP-TCS-52: Table Charging Station (FG5966-1X)

• MVP-WCS-52: Wall Charging Station (FG5966-1X)

• MVP-BP-5X: Battery Pack Kit (FG5966-27)

• MVP-STYLUS-52-GB: Black Stylus, Pack of 3

(FG5966-21)

• CC-USB: USB Programming Cable (FG10-5965)

FIG. 2

MVP-5100 Connector Locations

Front

Mini-USB port

DC power jack

Charging Station

Connector

Reset Button

1 2

Inhaltsverzeichnis

Seite 1 - MVP-5100

Installation GuideMVP-5100 5.2" Modero® ViewPoint® IR Touch PanelOverviewThe MVP-5100 Modero® Viewpoint® IR Touch Panel (FG5966-08) is a one-way

Seite 2 - Accessing the Setup Pages

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX MVP-5100 Installationsanleitung Seite 1

Stöbern Sie online oder laden Sie Installationsanleitung nach Fernbedienungen AMX MVP-5100 herunter. AMX MVP-5100 Installation guide [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

AMX MVP-5100 Installationsanleitung Seite 1

Stöbern Sie online oder laden Sie Installationsanleitung nach Fernbedienungen AMX MVP-5100 herunter. AMX MVP-5100 Installation guide [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen AMX MVP-5100