AMX Rack Rail Kit MMS Servers Bedienungsanleitung PDF herunterladen (Seite 111)

Appendix B: Software Installation

B-11

Adding/Deleting Hotspares

(*Note: In order to rebuild a RAID (RAID 0 or RAID 1), you would need to

add a new HDD as a hotspare.)

1. Turn on your computer and press Ctrl+A as prompted to access the ARC

Utility.

2. From the ARC menu, select Array Configuration Utility (ACU).

3. From the ACU menu, select Add/Delete Hotspares.

4. Use the up and down arrow keys to highlight and select the disk you

want to designate as a hotspare, and press <Insert>, and then, press

<Enter>.

5. Press yes when the following prompt is displayed:

"Do you want to create spare?" (Yes/No?)

The spare you have selected will appear in the Select Drive Menu.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 125 126

Keine Kommentare

AMX Rack Rail Kit MMS Servers Bedienungsanleitung Seite 111