
AV2SM
Auto/Manual Video Switcher
FG5919
This 2x1 video/stereo audio switcher can be set for automatic or manual
operation. In the standard manual mode, a single latched closure is used to
select and activate the “B" video input. In the automatic mode, the “B" input is
programmed to switch instantly to the “A" input when “video sync" is detected.
The “A" input, recognized as the default input, always has priority.
FEATURES
• Detects presence of video sync in auto mode (NTSC, PAL, or SECAN)
CONTROL PORTS
• Three BNC female connectors for Video Input A, B and Video Out
• Captive-wire connectors for unbalanced audio and closure input
RESPONSE
• Video – 8 MHz
• Audio – 30 Hz to 20 kHz
INCLUDES
• Internal jumper to select auto or manual (default) mode
ENCLOSURE: Molded black matte plastic
DIMENSIONS (HWD): 1.65" x 5.09" x 6.09"
(41.91 mm x 129.28 mm x 154.68 mm)
WEIGHT: 10.9 oz (309 g)
PC1
Power Controller, 10 A
(110 VAC only)
FG670
The PC1 provides one switched outlet for 120 VAC power control up to 1200 W.
CONTROL PORTS
• Either one latched or two momentary closures for discrete on and off, or one
momentary closure for toggling on and off
• Switched AC receptacle, 10 A at 120 VAC
INCLUDES
• Front-panel on/off button with status LED
• DIP switch to set closure mode
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD): 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT: 1.6 lbs (737 g)
OPTIONS
• AC-RK Accessory Rack Kit
PC2
Dual Power Controller, 5 A
(110 VAC only)
FG675
The PC2 provides two switched outlets for 120 VAC power control up to
1200 W.
CONTROL PORTS
• Either one latched or one momentary closure for toggling on and off
• Two switched AC receptacles, total load up to 10 A at 120 VAC
INCLUDES
• Two front-panel on/off buttons with status LEDs
• DIP switch to set closure mode
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD): 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT: 1.6 lbs (737 g)
OPTIONS
• AC-RK Accessory Rack Kit
UPC20+
Universal Power/Motor Controller,
20 A (110/220 VAC input)
FG672
The UPC20+ is a dual 20-amp AC power and motor controller designed for
conduit installation. The UPC20 can be configured for a wide variety of power
and motor control modes. Low-voltage contact-closure or open-collector inputs
allow control from simple wall panels or large systems. It is ETL listed.
CONTROL INPUTS
• Four closure inputs; operation defined by mode
- Motor Control mode alternates between the timed operation
of the two power relays
- Power Control mode allows independent control of both power relays
CONTROL PORTS
• Two 2400 W power relays
INCLUDES
• One-, two- and three-button logic modes
• Local test switches with status LEDs
• 115, 230 and 277 VAC control capability
ENCLOSURE: Metal with black matte finish, knockouts for conduit
DIMENSIONS (HWD): 8.5" (10.5" including flange) x 4.5" x 2.2"
(220 mm (270 mm including flange) x 110 mm x 60 mm)
WEIGHT: 3 lbs (1.4 kg)
POWER: Self-powered when used with 110/220 VAC applications
OPTIONS
• 12 VDC power supply (required for 277 VAC applications)
CONTACT CLOSURE INTERFACES
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
For more information about AMX products and services visit www.amx.com
11-03
Kommentare zu diesen Handbüchern