AMX NXT-CA7 Spezifikationen PDF herunterladen (Seite 131)

Programming

119

NXD-700i & NXT-CA7 7” Modero Touch Panels

Intercom Commands (Cont.)

^ICE' Intercom end - this command terminates an intercom call/connection.

Syntax:

SEND_COMMAND <DEV>,"'^ICE'"

Variables:

None.

Example:

SEND_COMMAND TP1,"'^ICE'"

SEND_COMMAND TP2,"'^ICE'"

Terminates an intercom call between two panels.

^ICM-TALK See ^ICM section on page 118.

Syntax:

SEND_COMMAND <DEV>,"'^ICM-TALK'"

Variables:

None.

Example:

SEND_COMMAND TP1,"'^ICM-TALK'"

^ICM-LISTEN See ^ICM section on page 118.

Syntax:

SEND_COMMAND <DEV>,"'^ICM-LISTEN'"

Variables:

None.

Example:

SEND_COMMAND TP1,"'^ICM-LISTEN'"

^ICM-MICLEVEL Set the microphone level during an intercom call.

Syntax:

SEND_COMMAND <DEV>, "^ICM-MICLEVEL"

Variables:

MICLEVEL: Range = 0 - 100

Example:

SEND_COMMAND TP1, "^ICM-MICLEVEL,40"

^ICM-MUTEMIC Set the state of the microphone on a panel to muted (1) or un muted (0).

At the start of each call the microphone starts out un muted.

Syntax:

SEND_COMMAND <DEV>, "^ICM-MUTEMIC"

Variables:

None.

Example:

SEND_COMMAND TP1, "^ICM-MUTEMIC,1"

^ICM-SPEAKERLEVEL Set the speaker level during an intercom call.

Syntax:

SEND_COMMAND <DEV>, "^ICM-SPEAKERLEVEL,55"

Variables:

Valid levels are from 0 to 100.

Example:

SEND_COMMAND TP1, "^ICM-SPEAKERLEVEL,55"

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX NXT-CA7 Spezifikationen Seite 131

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Touchscreen-Monitore AMX NXT-CA7