AMX Mouse Betriebsanweisung PDF herunterladen (Seite 31)

Chapter 3: Basic Operations 25

Chapter 3: Basic Operations

Power Up and LEDs

AMX5000 or AMX5010

There are three groups of LEDs on the front panel of your AMX5000 or

AMX5010 switch. Each green LED in the left group corresponds to a server

port. Each LED illuminates when the system or tiered AMX switch is

attached and powered up.

Figure 3.1: AMX5000 Unit

The green and amber LEDs in the center group indicate the status of your

LAN connection. When a valid IP connection is made to the network port of

the AMX switch, the green LINK LED blinks. The amber 100M LED indicates

the speed of the attached LAN. This LED illuminates when a 100M connection

is made or remains unlit when a 10M connection is made. The green power

(PWR) LED in the center group illuminates when the AMX switch is

powered and will blink only during a FLASH upgrade.

Additional green LEDs in the right group correspond to each user port and

illuminate when the AMX5100, AMX5110, AMX5120 or cascaded (AMX5000 or

AMX5010) switch is attached and powered up.

AMX user station

There are two blue LEDs on the front panel of the AMX user station. The top

LED is the power status LED and remains constantly lit when power is

connected and off when power is absent. The lower LED shows connection

and activity status. This LED blinks when the OSD is displayed and remains

constant when there is a valid connection between the AMX user station and

an AMIQ module or AMX switch.

Figure 3.2: AMX5110 User Station

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Keine Kommentare

AMX Mouse Betriebsanweisung Seite 31