AMX AXP-PLV POSITRACK PILOT VIDEO TOUCH PANEL Bedienerhandbuch Seite 20

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 30
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 19
Using the AXP-PLV PosiTrack Video Pilot
16
PT10-PLV Single Camera Pan/Tilt System
Using the AXP-PLV Touch Panel Program
This section describes the touch panel pages, and their buttons. When the AXP-PLV is powered up,
an initialization screen appears for several seconds. Then, the CAMERA page (FIG. 15) appears:
Simply touch the panel to activate the buttons and sliders on the panel.
Video preview/touch panel
screen:
The touch panel screen displays a video preview and gives you access
to various control features such as store/recall presets, gain and detail
settings and the camera configuration options via the touch panel but-
tons.
For details on using the touch panel buttons, refer to the Using the
AXP-PLV Touch Panel Program section below.
FIG. 15 CAMERA page
Preset buttons 1-8 You can store and recall up to 24 presets for zoom, focus, iris, pan/tilt and
speed settings. By default, preset buttons 1-8 are shown.
mode button Touch to display preset buttons 9-16. Press the mode button again to display
preset buttons 17-24.
store button Touch a preset button, then touch the store button to store the camera's cur-
rent pan/tilt position, zoom, focus, speed and iris settings as a preset.
recall button Touch a preset button, then touch the recall button to recall the pan/tilt position,
zoom, focus, speed and iris settings saved for the selected preset.
speed slider control Use this slider control to adjust the preset pan/tilt speed.
next button Touch to flip to the next touch panel page (in this case, the MENU page).
iris button Touch to toggle between automatic and manual iris control. If it is set to Man-
ual, you will use the iris control knob on the side of the AXP-PLV to open/close
the iris.
bars button Touch to toggle a color bar display on the screen.
config button Touch to open the CAMERA CONFIGURATION page, where you can configure
a camera for your system.
Camera Station
selection indicators 1-6
These indicators light to indicate which camera is currently selected (via the
CAMERA STATIONS 1-6 external pushbuttons).
Preset buttons 1-8
Camera Station
selection indicators 1-6
Seitenansicht 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare