AMX NXI Spezifikationen PDF herunterladen (Seite 8)

NXI NetLinx Integrated Controller

NXI NetLinx Integrated Controller (No Master)

Specifications

NXI Specifications

Power requirements 1.09 A @ 12 VDC (NXI only/no card)

Memory 64K of IR memory:·

• 32K IR memory for IR ports 8-11

• 32K IR memory for IR ports 12-15

Enclosure Metal with black matte finish

Front faceplate Plastic gray faceplate with translucent viewing window

Weight 4.10 lbs (1.85 kg)

Dimensions (HWD) 1.72" x 17.0" x 8.80" (43.68 mm x 431.80 mm x 223.52 mm)

Heat Dissipation: 44.7 BTU/hr (Typical)

Ports

RS-232/422/485 ports

(Ports #1-6)

Six RS-232/422/485 control ports with XON/XOFF (transmit on/transmit off), and

CTS/RTS (clear to send/ready to send), 300-230,400 baud.

Channel range = 1-255

• Channels 1-254 provide feedback only.

• Channel 255 (CTS Push channel): Reflects the state of the CTS Input if a

'CTSPSH' command was sent to the port.

Relay port

(Port #7)

12-channel relay port.

Channel range = 1-12

IR/Serial ports

(Ports #8-15)

8 IR/Serial control ports that support high-frequency carriers up to 1.14 MHz.

Channel range = 1-32,767

• Channels 1-253 (output): IR commands.

• Channel 254 (feedback): Power Fail (used with 'PON' and 'POF' commands).

• Channel 255 (feedback): Power status (when IOLink is set).

I/O port

(Port #16)

8-channel I/O port for contact closure, 0-5 VDC voltage sensing, or interactive power

sensing for IR ports.

Channel range = 1-8

Front Panel Components

Card slot Accepts NXC-ME260 NetLinx Master or Hub card.

• NXC-NH - Hub Card

• NXC-HS - Hub Server Card

• NXC-HE - Hub Expander Card

RS-232/422/485 LEDs 6 sets of red and yellow LEDs light to indicate ports 1-6 are transmitting or receiving

RS-232, 422, or 485 data:

• TX LEDs (red) blink when transmitting data.·

• RX LEDs (yellow) blink when receiving data.

Relay LEDs 12 red LEDs light to indicate relay channels 1-12 are active (closed).

IR/Serial LEDs 8 red LEDs light to indicate IR/Serial channels 1-8 are transmitting control data.

I/O LEDs 8 yellow LEDs light when I/O channels 1-8 are active.

Rear Panel Components

ICSP LED (green) Blinks in unison with the Master card's NetLinx LED indicating the ICSP bus is

synchronized.

ID pushbutton Sets the NetLinx ID (D:P:S) assignment for the NXI.

RS-232/422/485 ports

(Ports #1-6)

Six 10-pin (male) connectors that support bi-directional RS-232/422/485

communication (XON/XOFF, CTS/RTS, 300-230,400 baud).

• Channel range = 1-255

• Channels 1-254 provide feedback only.·

• Channel 255 (CTS Push channel): Reflects the state of the CTS input if a

'CTSPSH' command was sent to the port.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX NXI Spezifikationen Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Peripheriegeräte AMX NXI