AMX BCS Technical Information PDF herunterladen (Seite 24)

SHUTTLE PULSE WALL SWITCH - 5201001900

CONNECTING THE WALLSWITCH

Either of the 2 ports (1-EYE or 2-AUX) can be used to connect a (pulse) switch to open, close or stop the

drapery. This is called a dry contact connection.

Pins 1, 3 and 8 are used for this. If pins 3 (common) and 1 (open) are connected by means of the switch then

the drapery will OPEN. If pins 3 (common) and 8 (close) are connected then the drapery will CLOSE.

A standard network cable can be used for this, connect only 3 wires to the wall switch. When the copper wire

is too thin to connect, use a ferrules, like:

Internal pins 1 and 8 are not connected between ports 1 and 2. Use a splitter to ‘daisychain’ Shuttle motors.

These ports can also be used for home automation systems. Be sure the switching (relay) outputs are dead!

(free of potential).

8 3 1 8 3 1

11/2010 WDOC5201001900V1.2 www.forestgroup.nl

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

Keine Kommentare

AMX BCS Technical Information Seite 24