AMX BCS Technical Information PDF herunterladen (Seite 40)

BLIND CONTRACT SYSTEM

Installing the Blind Contract System

Use one wall/ceiling bracket for every 50-60cm track length.

Mount the system on wall/ceiling and attach the fabric. Attach the snap cord fixers on the cords at the bottom

of the blind. Do not cut off the exces cord yet.

adjustment screws

octogonal tube

Setting the motor end positions

● when the track is pre-assembled the cord is fully unwound (closed blind position). The lower end

position is already set.

● Adjusting the upper and lower end positions is done by turning the 2 adjustment screws. Use a 4mm

hex key, never a battery screwdriver. Which screw to adjust up and which screw to adjust down

depends on the direction of rotation ot the octogonal tube.

● One rotation of an adjustment screw is ± 3cm blind height.

● make sure that the cords never hang loose when the motor is running.

Control the blind upwards. Look at the octogonal tube and remember the direction of rotation. Make a

mark (with a permanent marker) next to the arrow with this direction of rotation. The screw next to this

arrow is the adjustment screw for the upper position.

Adjust the upper endposition:

Control the blind upwards. To adjust the upper end position higher, turn the marked adjustment screw to

direction +, until the desired height is reached.

If the upper end position is too high, turn the marked adjustment screw to direction -.

Control the blind downwards and upwards again. Repeat until desired height is accomplished.

Adjusting the lower endposition:

Control the blind downwards. To adjust the lower end position lower, turn the unmarked adjustment screw

to direction +, until the desired height is reached.

If the lower end position is too low, turn the unmarked adjustment screw to direction -. Control the blind

upwards and downwards again. Repeat until desired height is reached.

The motor should never make noise when it has stopped in the upper position. This happens

when the upper endposition is adjusted too high. The motor or cord could breakin this case.

03/2012 WDOCBCS www.forestgroup.nl

40

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47

Kommentare zu diesen Handbüchern

Keine Kommentare

Dewalt D25013 Manual de instrucciones (36 paginas)

Marca: Dewalt | Categoria: Power tools | Tamaño: 4.19 MB |

Inglés

Español

Portugués

Tabla de contenidos

FOR FUTURE REFERENCE

3

Rotary Hammers

4

COMPONENTS (Fig. 1)

7

ASSEMBLY AND ADJUSTMENTS

7

Side Handle (Fig. 1)

7

Trigger Switch (Fig. 1)

8

Reversing Lever (Fig. 1)

8

Mode Selector (Fig. 2)

8

SDS-plus

9

Chuck (Fig. 1)

9

OPERATION

9

Proper Hand Position (Fig. 3)

9

Overload Clutch

10

Drilling Tools

10

Drilling (Fig. 1)

10

Chipping and Chiselling

11

Depth Rod (Fig. 4)

11

MAINTENANCE

11

Cleaning

11

Lubrication

12

Accessories

12

Definiciones: Normas

13

DESCRIPCIÓN (FIG. 1)

17

MONTAJE Y AJUSTES

18

Mango lateral (Fig. 1)

18

Palanca de reversa (Fig. 1)

19

Selector de modo (Fig. 2)

19

FUNCIONAMIENTO

20

Bien colocar las

20

Embrague de sobrecarga

21

Taladros (Fig. 1)

21

Taladrado

21

Cincelado

22

Português

24

Definições: Diretrizes de

24

Segurança

24

Regras Gerais de Segurança

24

GUARDE ESTAS INSTRUÇÕES

24

Componentes (Fig. 1)

28

MONTAGEM E AJUSTES

29

Empunhadura lateral (Fig. 1)

29

Alavanca de reversão (Fig. 1)

30

Limitador de torque

32

Ferramentas de perfuração

32

Perfuração (Fig. 1)

32

Rompedor

33

MANUTENÇÃO

34

Lubrificação

34

Acessórios

34

Dewalt D25013 Manual de usuario (20 paginas)

Marca: Dewalt | Categoria: Power Tools | Tamaño: 2.46 MB |

Ruso

Tabla de contenidos

501501-50 RUS/UA

1

Рисунок 1

2

Рисунок 2

2

Рисунок 4

3

Рисунок 3

3

ПЕРФОРАТОРЫ SDS PLUS

4

ДЛЯ ТЯЖЕЛЫХ РАБОТ

4

D25012, D25013

4

Декларация соответствия ЕС

5

Дополнительные правила без

7

Остаточные риски

8

Маркировка инструмента

8

Комплект поставки

8

EWALT или Вы больше

15

EWALT обеспечивает прием

16

D25012K DREHHAMMER 1

18

Más productos y manuales para Herramientas Eléctricas DeWalt

Modelos	Tipo de documento
D25330	Manual de usuario Инструкция по эксплуатации DeWalt D25330 [de] , 20 paginas
D25405K	Manual de usuario Инструкция по эксплуатации DeWalt D25405K, 20 paginas
D25324	Manual de usuario Инструкция по эксплуатации DeWalt D25324, 20 paginas
D25961	Manual de usuario Инструкция по эксплуатации DeWalt D25961, 20 paginas
D25870	Manual de usuario Инструкция по эксплуатации DeWalt D25870, 28 paginas
D25840	Manual de usuario Инструкция по эксплуатации DeWalt D25840, 20 paginas
D25980	Manual de usuario Инструкция по эксплуатации DeWalt D25980, 16 paginas
D26414	Manual de usuario Инструкция по эксплуатации DeWalt D26414, 20 paginas
D25980	Manual de usuario Инструкция по эксплуатации DeWalt D25980, 20 paginas
D25941	Manual de usuario Инструкция по эксплуатации DeWalt D25941, 32 paginas
D26410	Manual de usuario Инструкция по эксплуатации DeWalt D26410, 20 paginas
D26453	Manual de usuario Инструкция по эксплуатации DeWalt D26453, 20 paginas
D26441	Manual de usuario Инструкция по эксплуатации DeWalt D26441, 16 paginas
D26430	Manual de usuario Инструкция по эксплуатации DeWalt D26430, 24 paginas
D26204	Manual de usuario Инструкция по эксплуатации DeWalt D26204, 32 paginas
D26423	Manual de usuario Инструкция по эксплуатации DeWalt D26423, 24 paginas
D26501K	Manual de usuario Инструкция по эксплуатации DeWalt D26501K [de] , 16 paginas
D26480	Manual de usuario Инструкция по эксплуатации DeWalt D26480, 20 paginas
D27900	Manual de usuario Инструкция по эксплуатации DeWalt D27900 [de] , 16 paginas
D27901	Manual de usuario Инструкция по эксплуатации DeWalt D27901, 16 paginas