AMX MAX-HT12T Bedienerhandbuch PDF herunterladen (Seite 42)

MXT/D-700 - 7" X Series Panels

MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels

The Installation Template is marked on one side with directions for both landscape and portrait installations to ensure

that the touch panel and Backbox are properly aligned.

1. Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.

2. After ensuring proper placement, cut out the mounting surface for the Backbox, using the Installation Template as a

guide.

3. Thread the incoming cables through the surface opening (FIG. 35 and FIG. 36).

Using the Installation Template to select the final placement of the Backbox is highly

recommended. The outside edges of the template are the same dimensions as the

touch panel, which allows you to troubleshoot possible conflicts with wall edges,

doors, and other potential obstacles.

Making sure the actual cutout opening is slightly smaller than the provided

dimensions is highly recommended. This provides a margin for error if the opening

needs to be expanded. Too little wall material removed is always better than too

much.

FIG. 35 MXD-700 Backbox Installation (Landscape)

#4 Screws

2X Installation Clamp

for Wall Thickness

.37 [12.03] to .98 [.25.0]

4X Knock-Outs

Remove for Cable

Routing as Needed

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 61 62

Keine Kommentare

AMX MAX-HT12T Bedienerhandbuch Seite 42