
ICT 2.0.1 AV Standards Addenda and Updates
2.3 Videoconferencing Standards (v3.1 2013)
2.3: 6.2 Cisco/Tandberg C20plus
The Cisco model SX20 replaces the C20. As was the case for the C20, the 12X camera must
be purchased, not the 4X or other degraded camera or system options. As per Deakin
Standards, the MS option must not be purchased.
2.3: 6.8.2 Reconfigurable spaces
Ceiling microphone arrays suitable for reconfigurable spaces are
currently being trialled. The only recommended models at this
stage are:
Audix M40 inverted gooseneck (white) range. Microphone must
be directional (cardioid). The Ceiling Microphone Configurator
design tool has now been released for trialling as ICT Resource
2.7.3.3. Please contact the DeS AV and Networks Unit Leader
for further information.
ClearOne Beamforming Microphone Array. Please contact the
DeS AV and Networks Unit Leader for further information.
Directional FoH speaker for use with ceiling microphone array:
The EAW LS432i has been successfully trialled for use with ceiling
microphone arrays.
Application: A single EAW LS432i shall be mounted between the
FoH dispays/images and below the camera. Audio routing: Far-
end audio is fed (mono) to this FoH centre speaker. A pair of
standard FoH speakers shall also be installed for local content
audio (stereo). Local voice reinforcement is not used with ceiling
mic solution.
Choice of colours:
EAW LS432i-White shall be used in conjunction with projectors
to blend in with the white presentation surface
EAW LS432i-Black shall be used in conjunction with LCD panels
to blend in with the dark wall colour required behind LCD
displays.
Kommentare zu diesen Handbüchern