AMX MET-7 Spezifikationen PDF herunterladen (Seite 18)

Custom Button Installation

Metreau Keypads

1. On the back of the keypad assembly, remove the four screws that secure the Mounting Plate (with

Faceplate attached) to the Circuit Board.

2. Carefully remove the Circuit Board from the Mounting Plate. Once the Circuit Board is removed from the

Mounting Plate, the buttons are prone to fall out of position. In most cases, there is sufficient friction

within the button mounts to hold them in place on the Circuit Board. However, take care at this point not

to accidentally drop the buttons or any other part of the keypad assembly.

3. Gently lift each button off of their mounting posts on the Circuit Board.

4. Select the location of the custom buttons and gently snap them into place on the Circuit Board.

Be sure to note the orientation of the LED window on each button, to avoid accidentally mounting them

upside down.

5. Carefully insert the Circuit Board (with new buttons mounted) to the Mounting Plate.

Take care to align the buttons properly with their respective holes in the Faceplate.

6. Replace and secure the four screws on the back of the Circuit Board. (FIG. 11).

Button Kits

Three different button kits are available for Metreau keypads, to accommodate most installations:

Audio

SIRIUS, XM, IPOD, MP3, CD2, AUX2, DVD2, PC, FM.

Residential

LIGHTS, FAN, SHADES, HVAC+, HVAC -, UP, DOWN, TV.

Commercial

DISP, PROJ, VC, AC, HVAC, LIGHTS, SCREEN.

FIG. 2 Keypad assembly

Plastic Faceplate

Metal Mounting Plate

Circuit board

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

Keine Kommentare

AMX MET-7 Spezifikationen Seite 18