AMX MET-7 Spezifikationen Seite 38
- Seite / 84
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Programming The Metreau Keypads
30
Metreau Keypads
LED Feedback for 2-Position Pushbuttons
The MET-7 and MET-13 Keypads feature a 2-Position pushbutton at the bottom of the button layout (FIG. 32).
It can be used either as a single button (in which case it functions just like the other buttons), or it can be used
as a 2-position button. In many cases, this button is used as a 2-Position button to provide ramp up/down
control, for volume, light levels, etc.
On the MET-7, the 2-Position button utilizes button numbers 7 (left-side) and 8 (right-side).
On the MET-13, the 2-Position button utilizes button numbers 13 (left-side) and 14 (right-side).
Only the left button provides LED feedback.
In order to achieve LED feedback on the right button, feedback must be toggled on the left button
Sending Firmware to Metreau Keypads (AxLink)
The Firmware on the AxLink-enabled Metreau keypads (MET-6N, MET-7 and MET-13) can be updated via
the NetLinx Studio2 application.
Device Addressing on MET-6N Keypads
The MET-6N uses two AxLink devices addresses - one for the Keypad itself, and a second one for
the IR Receiver.
The device address of the IR Receiver is auto-assigned to be one number higher than the device
address of the Keypad itself (to which the firmware is uploaded).
The MET-6N will appear as two devices in the Devices frame, because it’s built-in IR Receiver is
recognized as a separate online device.
Firmware is uploaded to the device address of the Keypad (not the IR Receiver).
For example, if the MET-6N is set to device address 127, then the IR Receiver on that
MET-6N will appear as device number 128. Firmware must be sent to the keypad, not the IR
Receiver (in this example, device 127).
1. Open NetLinx Studio2.
2. Go to Tools > Firmware Transfers > Send to Axcess Device... This opens the Send to Axcess Dialog
Window.
FIG. 3 MET-7 and MET-13 with 2-Position Button
MET-7 MET-13
Button #7
Button #8
Button #13
Button #14
Refer to the NetLinx Studio 2 online help for additional details on firmware transfers.
NetLinx Studio 2 is available for free download from www.amx.com.
- Keypads 1
- Table of Contents 3
- Metreau Keypads 4
- Navigation Wheel 11
- MET-7 Metreau 7-Button Keypad 12
- MET-13 Specifications 13
- DAS-MET-6SRC Specifications 14
- Pushbuttons 1-6 15
- DAS-MET-NUM Specifications 16
- Custom Button Installation 17
- Button Kits 18
- Custom Keypads and Buttons 19
- Metreau Keypads 20
- AxLink Device Addressing 21
- 8-position mini-DIP Switch 22
- Mounting and Installation 23
- Mounting Procedures 25
- Wiring and Connections 27
- AxLink straight-thru wiring 28
- SWT Wiring 29
- SWT wiring 30
- Pin #1 Pin #1 30
- Button Layouts 35
- Display Bargraph 36
- Supported SEND_LEVELs 36
- Supported SEND_COMMANDs 37
- 1. Open NetLinx Studio2 38
- Overview 41
- Listening To an iPod 42
- Listening To the Radio 42
- Adjusting Volume 42
- DAS-MET-6SRC 43
- Bass Level Adjust Mode 43
- Treble Level Adjust Mode 44
- Balance Adjust Mode 44
- Turning SRS Off 45
- Turning Privacy Mode Off 45
- Working With Sources 46
- Turning Off All Zones 48
- Direct Access 53
- Working With Presets 55
- Recalling A Preset 56
- Working With Favorites 57
- Working With Zone Grouping 58
- Adding A Zone To Group 59
- Ungrouping All Zones 59
- Working With Alarms 60
- Setting Alarm In a Zone 61
- Keypad Lockout 62
- Unlocking A Keypad 63
- Unlocking All Keypads 63
- Using the NetLinx Module 65
- Main Pages 66
- Zone Options 67
- Change Source 67
- Device Control Pages 68
- Internal Sirius 69
- Device Control Page - DVD 70
- Device Control Page - CD 71
- Audio Server 72
- Satellite 73
- External Tuner 74
- Device Control Page - Other 75
- Setup Pages 76
- Setup - Alarms 77
- Adding an Alarm 77
- Removing an Alarm 79
- SWT Troubleshooting 81
- Zone Connection Problems 82
- No Keypad Activity 83
- Keypad Lights, No Sound 83
Verwandte Produkte und Handbücher für Fernbedienungen AMX MET-7
(17 Seiten)
Fernbedienungen AMX Precis Bedienerhandbuch
(2 Seiten)
(2 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.054 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern