AMX MET-7 Spezifikationen PDF herunterladen (Seite 30)

Wiring and Connections

Metreau Keypads

1. Strip 0.25 inch (6.35 mm) of wire insulation off all wires.

2. Insert each wire into the appropriate opening on the connector according to the wiring diagrams and

connector types described in this section.

DAS-MET-6SRC - SWT Data and Power Connections

Connect the Matrix Controller’s Zone Output connector to the four-pin connector on the rear panel of the

Metreau keypad labeled TO CONTROLLER for data and 12 VDC power.

2. Connect the other four-pin connector on the keypad labeled TO SPEAKERS to the SWT speakers as

shown in FIG. 19.

DAS-MET-NUM - Connecting to the Main DAS-MET-6SRC Keypad

The DAS-MET-NUM Metreau numeric keypad connects to the main DAS-MET-6SRC keypad via a

14-pin connector, as indicated in FIG. 23:

The red line on the cable indicates Pin #1.

The cable cannot be twisted, it must be straight across (Pin #1 to Pin #1).

FIG. 5 SWT wiring

FIG. 6 DAS-MET-NUM connected to main DAS-MET-6SRC keypad

SWT connectors on

Mi-Series Controller

Speakers

Metreau keypad

R+

TO CONTROLLER

TO SPEAKERS

R-

L-

L+

Delta Series Controller

Carbon XA Series Amplifier

DAS-MET-NUMDAS-MET-6SRC

14-pin connector14-pin connector

Pin #1 Pin #1

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

Keine Kommentare

AMX MET-7 Spezifikationen Seite 30