AMX TPI-PRO-2 Spezifikationen PDF herunterladen (Seite 13)

TPI-PRO (Total Presentation Interface)

TPI-PRO Specifications (Cont.)

Front Panel Components (Cont.)

• Buttons: Four white buttons provide access to the following configuration options:

• RESOLUTION: Opens a screen used to select the TPI-PRO output video signal

resolution, ranging from 640 x 480@60Hz to 1920 x 1200@60Hz.

This output resolution setting must not be greater than the resolution on the

connected panel.

Refer to the Setting the Output Resolution section on page 26.

• TOUCH: Opens the Panel Information page, where you can select from a series of

serial touch panel drivers, and select the driver that corresponds to the serial

touch panel connected to the TPI-PRO (via the TOUCH INPUT connector).

Refer to the Setting the Touch Drivers (Serial Touch Monitors Only) section on

page 27 for more information.

• CALIBRATE: Opens the Calibration page, displaying a series of crosshairs. These

crosshairs are used to calibrate the touch device being used.

Refer to the Calibrating the TPI-PRO section on page 28.

• SETUP: Opens the TPI-PRO firmware setup menu.

Refer to the TPI-PRO Configuration Pages section on page 47.

Rear Panel Components

• VIDEO/VGA Inputs: HD-15 connectors, one per input source (1-4 on the TPI-PRO-4, 1-2 on the

TPI-PRO-2).

Each connector supports VGA graphics, S-video, composite video, and component

video.

• VGA Outputs: 2 HD-15 connectors:

• 1 connector for the touch-panel control display which displays the video feeds, G4

graphics, external windowed video/graphics inputs, and annotation graphics (G4

graphics can be turned off under program control).

• 1 connector for the public-view non-touch monitor which displays only the video

feeds, G4 graphics, external windowed video/graphics inputs, and annotation

graphics (G4 graphics can be turned off under program control).

• Both outputs use the same resolution settings.

Each output can send a maximum resolution of 1920 x 1200@60 Hz.

Note: The TPI-PRO does not provide Component (YPbPr) or Interlaced outputs. It

provides 1920x1080 Progressive RGBHV (the same resolution as 1080p, but it in

the RGB color space).

• Source TOUCH,

KEYBOARD/MOUSE

USB ports:

2 or 4 USB Type-B device ports, one per source computer—for source USB Touch

Monitor, mouse/keyboard control (1-4 on the TPI-PRO-4, 1-2 on the TPI-PRO-2).

Note: Do not use a USB hub to connect multiple USB devices to the TPI-PRO.

• Host USB Touch

Monitor KEYBOARD/

MOUSE USB ports:

2 USB Type-A ports that can be used for a keyboard, mouse, external storage unit,

or USB-capable touch panel interface.

Note: Do not use a USB hub to connect multiple USB devices to the TPI-PRO.

• ETHERNET

10/100 port:

RJ-45 port provides 10/100 Mbps communication with the NetLinx Master (via ICSP

protocol over Ethernet).

• The Ethernet port automatically negotiates the connection speed (10 Mbps or 100

Mbps), and whether to use half duplex or full duplex mode.

• This communication is reflected via the front ICSP LED.

• TOUCH INPUT

port:

RS-232 (DB9) 9-pin serial port provides connectivity to a pointer device (i.e. touch

screen) that requires a serial connection.

• AUDIO OUT

connector:

3.5mm mini-jack provides stereo output - for use with line-level (0.707 VRMS) non-

amplified stereo output only.

• Power connector: 2-pin 3.5 mm mini-Phoenix connector.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 193 194

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX TPI-PRO-2 Spezifikationen Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung AMX TPI-PRO-2