AMX TPI-PRO-2 Spezifikationen PDF herunterladen (Seite 47)

Configuring Communication Settings

TPI-PRO/DVI (Total Presentation Interface)

Configuring a Static IP Address

Press the System Settings button on the Protected Setup page (FIG. 36 on page 41) to open the System

Settings page (FIG. 41 on page 43).

2. In the IP Settings section (FIG. 42), press the DHCP/Static button until the choice cycles to Static.

3. Press the IP Address button to open an on-screen keypad, and enter the static IP address provided by

your System Administrator. Press Done to close the keypad.

4. Repeat this process for Subnet Mask and Gateway.

5. Press the Host Name button to open an on-screen keyboard, and enter an alpha-numeric string for the

Host Name (optional).

 If the Host Name is left blank, it will automatically resort to the default - "localhost".

 Press Done to close the keyboard.

6. Press the Primary DNS button to open an on-screen keypad, and enter the Primary DNS address

provided by your System Administrator. Press Done to close the keypad.

7. Repeat this process for the Secondary DNS field.

8. Press the Domain button to open an on-screen keyboard, and enter the unique, resolvable domain address

provided by your System Administrator. Press Done to close the keyboard.

9. Press the Back button to return to the Protected Setup page.

10. Reboot the TPI-PRO/DVI (see the Rebooting the TPI-PRO/DVI section on page 54).

Before you start, obtain a pre-reserved Static IP Address to assign to the

TPI-PRO/DVI from your System Administrator.

FIG. 43 System Settings page - IP Settings

Press to cycle through options, select Static

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 193 194

Keine Kommentare

AMX TPI-PRO-2 Spezifikationen Seite 47