AMX RPMLoader Bedienungsanleitung PDF herunterladen (Seite 23)

Programming the CCD-W6BRL Clear Connect Keypad

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

Programming the CCD-W6BRL Clear Connect

Keypad

Overview

If the RPM Project includes a CCD-W6BRL Clear Connect Keypad, then the keypad buttons must each be programmed

to activate RPM-generated Lighting Scenes (1-6). Keypads also include a Raise button and a Lower button for ramping

functions (see FIG. 9 on page 5).

Keypad buttons are configured via the NXB-CCG WebConsole. Keypad buttons are represented in the Program page,

under Keypad in the Devices window (FIG. 52):

Fundamentally, the Lighting Scenes 1-6 that are included with the RPM project equate to Buttons 1-6 under Keypad in

the NXB-CCG’s WebConsole.

You can add a Dimmer function and/or a Switch function to Button 1, 2, 3, 4, 5 and 6 under Keypad.

Dimmer Functions specify a dim level (as well as fade time) to each button. These six dim levels equate to the

six Lighting Scenes provided by RPM. When you add a Dimmer to a Keypad button, it associates the button

with the specified dim level (and fade time).

Switch Functions specify On or Off

To configure Buttons 1-6 on the CCD-W6BRL Keypad (see FIG. 9 on page 5) to match RPM Lighting Scenes 1-6:

1. In the Program page, click on Button 1 (under Keypad in the Devices window) to open the Button 1 Details page

(FIG. 53).

FIG. 52 NXB-CCG WebConsole (Program page) - Keypad buttons

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Keine Kommentare

AMX RPMLoader Bedienungsanleitung Seite 23