AMX RPMLoader Bedienungsanleitung PDF herunterladen (Seite 29)

Programming the CCD-OCRB-P (-WH) Clear Connect Occupancy Sensor

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

6. Click Save to save changes.

7. Repeat steps 1-6 for Unoccupied Action.

Configuring Sensor Actions: Adding Switch Functions

Unlike Dimmers, Switches only use two levels: On and Off. Use the Add Device function in the Button Details pages to

add a Switch to Sensor Actions if necessary. Once a Switch has been added to an action, activating the Lighting Scene

associated with the action will turn the switch On or Off:

1. In the Program page, click on Occupied Action (under Occupancy (Sensor) in the Devices window) to open the

Occupied Action Details page (see FIG. 62 on page 24).

2. In the Occupied Action Details page, click Add Device to open the Add Devices To Button popup (FIG. 66):

3. Select Switch to associate a switch level (On or Off) to Occupied Action . This setting will turn the switch either On

or Off, when the Sensor detects that the room is occupied.

4. Click Add to add the Switch to Occupied Action. This closes the popup and adds the Switch Programming table to

the Occupied Action Details page (FIG. 67):

The Switch Programming table consists of three columns:

5. Click in the Level cell to edit the Level value (FIG. 68):

Note that the default (Switch) Level setting for all actions is On. Select either On or Off.

6. Repeat steps 1-5 for Unoccupied Action.

Once a Switch setting has been configured for both actions, the On or Off value specified for each action will be

activated by the Sensor.

FIG. 65 Dimmer Programming table - Editing the Level value

FIG. 66 Add Devices To Button popup

FIG. 67 Occupied Action Details page - Switch Programming table

• Device Name: The name of the device (Switch). The Device Name is read-only.

• Level: This is the switch level setting for this button. By default, Level is set to On.

Click inside this cell to edit the switch level value (On or Off) for Occupied Action.

• Remove: Click to remove the Switch from this action.

FIG. 68

Switch Programming table - Editing the Level value

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

AMX RPMLoader Bedienungsanleitung Seite 29