AMX NXB-CCG-K Technical Information PDF herunterladen (Seite 29)

Lutron® integration protocol

PROGRAMING Command Formats

PROGRAMMING Command-speciﬁc ﬁelds

Action Numbers and Parameters:

Description Action Number Parameters

Display programming of a speciﬁc

phantom button

Note: To display programming of all phantom

buttons, leave the button # ﬁeld blank

None None

Display Stop-If-Moving conﬁguration of a speciﬁc

phantom button

Note: To display Stop-If-Moving conﬁguration of all

phantom buttons, use button #0

4 None

Example PROGRAMMING Commands

The following examples show how to verify the programming of the phantom buttons of a

QSE-CI-NWK-E with an Integration ID of “1.”

Operation Command String

Display programming of phantom button 1 ?PROGRAMMING,1,1<CR><LF>

Display programming of all phantom buttons ?PROGRAMMING,1<CR><LF>

Display Stop-If-Moving conﬁguration of phantom button 5 ?PROGRAMMING,1,5,4<CR><LF>

Display Stop-If-Moving conﬁguration of all phantom buttons ?PROGRAMMING,1,0,4<CR><LF>

Operation

Command

?PROGRAMMING, 1, Button Number, Action Number

Integration ID or Serial # of

the QSE-CI-NWK being used

Use “PROGRAMMING Command-speciﬁc ﬁelds” tables

to complete these command ﬁelds.

Phantom Button Number

(can be 1–100)

QS Standalone (continued)

System Commands (continued)

PROGRAMMING Commands (continued)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 143 144

Keine Kommentare

AMX NXB-CCG-K Technical Information Seite 29