AMX NXB-CCG-K Technical Information PDF herunterladen (Seite 85)

Lutron® integration protocol

DEVICE Command-speciﬁc ﬁelds

Component Numbers:

Component Component Number Available Actions

Zone 1 – Zone 4

1,2

1 – 4 Set or Get Light Level, Raise, Lower, Stop

NOTES

1. Assigned zones can be given an individual Integration ID and controlled using the #OUTPUT command. For more details

on setting the output Integration ID of a zone component, see the Integration Access Point section of the system that

contains the QS Motor Module.

2. When the QS Motor Module is part of a Quantum® system, then the commands found in the Quantum® “System

Commands” section of this integration document should be used.

Action Numbers and Parameters:

Action Action Number Parameters

Set Light Level 14 Level = 0–100 or 0.00 –100.00

Fade

in: Always use 0

Delay

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Raise 18 None

Lower 19 None

Stop 20 None

NOTES

1. Setting the level to 0% will cause the output to travel in the Closed direction; setting the level to 100% will cause the

output to travel in the Open direction; setting any level from 1 – 99% will be ignored by the output. Querying its level will

report 0 or 100%, based on the last direction it moved.

2. Fade is not available for Motor Loads because they move at a constant rate. The parameter must be entered, but is

ignored.

3. The delay time is optional. When not used, the system will use a zero-second delay.

4. Fractional seconds “SS.ss” will be rounded down to the nearest quarter-second. For example, if a fade time is speciﬁed

as 1.31 seconds, a value of 1.25 seconds will be used.

DEVICE Command Format

Use “DEVICE Command-speciﬁc ﬁelds” tables

to complete these command ﬁelds.

Operation

Command

Integration ID (example)

#DEVICE, 5, Component Number, Action Number, Parameters

Energi Savr NodeTM QS

for Motor Module (International) (continued)

DEVICE Commands

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 143 144

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX NXB-CCG-K Technical Information Seite 85

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller AMX NXB-CCG-K