AMX NXB-CCG-K Technical Information PDF herunterladen (Seite 54)

Lutron® integration protocol

OUTPUT Command Format

OUTPUT Command-speciﬁc ﬁelds

Action Numbers and Parameters:

Action Action Number Parameters

Set (#) or Get (?) Output Level 1 Level

= 0 –100 or 0.00 –100.00

Fade

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Delay

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Start Raising

2 None

Start Lowering

3 None

Stop Raising / Lowering

4 None

Pulse 6 Pulse

time in: SS.ss

, SS, MM:SS, or HH:MM:SS, or

Delay

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Set DMX color / level settings

17 Color / level index: 0 –255

0.00–100.00

Motor Jog Raise

18 None

Motor Jog Lower

19 None

Motor 4-Stage Jog Raise

20 None

Motor 4-Stage Jog Lower

21 None

NOTES

1. The Level is taken as a percentage.

2. The Fade and Delay time are optional. When not used, the system will use a one-second fade time with zero-second

delay. The minimum fade and delay time is 0 seconds. The maximum fade and delay time is 4 hours. For shade outputs,

the Fade parameter has no effect (since shades have ﬁxed speeds) but it is required when specifying an optional delay.

3. Fractional seconds “SS.ss” will be rounded down to the nearest quarter second. For example, if a fade time is speciﬁed

as 1.45 seconds a value of 1.25 seconds will be used.

4. When a Raise / Lower command is issued, the output’s level will continue to go towards high end / low end until a Stop

command is received.

5. The default time is one second.

6. Not supported in RadioRA® 2.

7. Quantum® 2.5 and up.

Quantum® (continued)

System Commands (continued)

OUTPUT Commands

Use “OUTPUT Command-speciﬁc ﬁelds” tables

to complete these command ﬁelds.

Operation

Command

Integration ID (example)

#OUTPUT

, 2, Action Number, Parameters

NOTE

1. OUTPUT commands can be used to control system lighting zones, contact closed outputs and AC Motor Loads.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 143 144

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX NXB-CCG-K Technical Information Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller AMX NXB-CCG-K