AMX NXB-CCG-K Technical Information PDF herunterladen (Seite 47)

Lutron® integration protocol

Quantum® (continued)

Integration Access Points (continued)

Connection Information

Provides an RS232 and Ethernet connection to communicate with external equipment.

RS232

The RS232 connection has the following communication settings:

• Baud Rate 9600/19200/38400/115200 (set via dipswitch on unit)

• 8 data bits

• No parity bit

• 1 stop bit

• No ﬂow control

Ethernet

Conﬁguring the control interface to communicate over a network takes not only knowledge of

the Quantum® system, but of networking as well. Installers with limited networking knowledge

are advised to contact a networking professional before attempting to connect a QSE-CI-NWK-E

through a network. The information below will help an installer communicate the QSE-CI-NWK-E

conﬁgurations to a network professional.

The installer will make any necessary changes to the control interface using the Lutron® DeviceIP or

Quantum® PC software tool and the network professional can make any necessary changes to the

networking equipment.

Single Ethernet Port

• IEEE® 802.3 Auto-Sensing 10BaseT / 100BaseTX

• Supports MDI/MDIX auto-crossover (no crossover cable needed).

• Female 8P8C “Computer RJ-45” socket

• Green “Connect” LED, Amber “Activity” LED

• Use Cat 5 cabling or better

TCP / IP Settings

• IP Address: <static default = 192.168.250.1>

• Subnet Mask: <static default = 255.255.255.0>

• Gateway: <static default = 0.0.0.0>

Protocols Used for Integration

• TELNET

Telnet Server

• Used by third party equipment (e.g., touch screen)

• Limited to transferring ASCII characters

• Telnet Port number is 23

• Login #1: nwk

• Login #2: nwk2

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 143 144

Keine Kommentare

AMX NXB-CCG-K Technical Information Seite 47