AMX IRLIB Bedienungsanleitung PDF herunterladen (Seite 29)

KI-1856C Rauland RANGER

Head End—

Installation

Page 29 of 55 (Jun-98)

Figure 5. “

IRLIB

Configure” Dialog Box

Make sure that the check marks (

√

) match the setting that your system is using (i.e., the

baud rate setting should match the settings on your

RANCPU

; these usually are Com 2,

38400, or, for a laptop. Com 1, 38,400). If the settings are correct, press

Esc

to exit the

dialog box. If the settings do not match, change them accordingly by moving the cursor

keys to the appropriate settings and pressing

Enter

. When the settings are correct they

will have a

√

next them. Press

F10

to exit the dialog box and return to the main menu.

If the system still does not report “Master Present,” call Rauland-Borg for technical

assistance.

Selecting

Devices and Programming the

RANIR

The next step is to select the

device whose commands the

RANGER

system will

emulate and program the

RANIR

card that corresponds with it. Use the following

procedure:

Press

to access the “Hand Control” menu.

The cursor's position will default to the “Select” command. Press

Enter

to accept this

choice. This will open the dialog box shown in Figure 6.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 54 55

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX IRLIB Bedienungsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software AMX IRLIB