AMX IRLIB Bedienungsanleitung PDF herunterladen (Seite 35)

KI-1856C Rauland RANGER

Head End—

Installation

Page 35 of 55 (Jun-98)

Figure 13. Launching the

IRLIB

Program

Press

to open the “Communications” menu. Use the cursor key to move down to

the Configure option and press

Enter

. A dialog box similar to one in Figure 14 should

appear on your screen.

Figure 14. “Configure” Dialog Box

Match the

COM

port settings to those that you will use for your capture session. A

check mark (

√

) should appear next to the

COM

port that you are using. While the

COM

port settings may vary from machine to machine, the Baud rate must be set to 9600 for

capture to work. If you are using the

RANPCSW

media center computer, the baud

rate will likely be set to 38,400. Change it for this capture session, but remember that

you will need to change it back when you download new control programs to your

RANCPU

or your

RANIR

cards. If you needed to make changes, press

F10

to save your

new configuration information.

Capturing a New Function

During the next procedure you will literally send and capture all the functions of

the media device’s original manufacturer's remote that can be emulated by the

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 54 55

Keine Kommentare

AMX IRLIB Bedienungsanleitung Seite 35