AMX IRLIB Bedienungsanleitung PDF herunterladen (Seite 37)

KI-1856C Rauland RANGER

Head End—

Installation

Page 37 of 55 (Jun-98)

Figure 16. Function List

Consult the templates maps at the end of this section for information regarding the

location of the functions that the

RANGER

system's

RANHHELD

emulate. We have

provided a template map for

VCR

VFLOP

(or

VSTILL

laser disc,

CD-ROM

and

for

CD-I

Working backwards from these provided templates, begin building your library. Use

the cursor keys to navigate the function list and find the corresponding number for the

function you are capturing. When you get to the number, press

Enter

. Type in the

function name and press

Enter

again. Your screen should now appear similar to the

one shown in the following example. Notice the message in the right-hand portion of

your screen indicating that the software is “Waiting for Function.” You are now ready

to begin capturing the function that you have specified.

Figure 17. Function List

The

RANIRIS

should have a green “Ready” light on, and the

LCD

should display “01.”

It is best to work in a room that is not very bright, and away from sunlight. Place the

manufacturer's remote a few inches from the sensor and press the button of the

function you want to capture. Hold the button down until the green ready light goes

off. Do not move the remote until after the next step has been completed.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 54 55

Keine Kommentare

AMX IRLIB Bedienungsanleitung Seite 37