AMX IRLIB Bedienungsanleitung PDF herunterladen (Seite 32)

KI-1856C Rauland RANGER

Head End—

Installation

Page 32 of 55 (Jun-98)

11.

You will now be prompted to enter a device number, as shown in Figure 10. The

number you enter here should correspond to the physical slot number where the

RANIR

card is positioned or the

RANCL

101

RANCL

201

RANCLASS

1 address. In

addition to “

1” and “

,” there are sixteen possible slot locations in each

RANCC

16. The card cage has numbers in front of each card's location. Find the card

that your are programming. Type in this number and press Enter. If the device is an

RANCL

101

RANCL

201

RANCLASS

1 type in its address and press Enter. If

the program reports “Error in Clearing,” you may have chosen the wrong card or

classroom address, or your control system may not be configured correctly. See “

IRLIB

does not Respond with Master Present” earlier in this section for more information.

Figure 10. “Enter Device Number” Dialog Box

12.

Assuming you have chosen the appropriate device number, your screen should now

display an information box showing the progress of your

programming as in.

Figure 11. Transferring of

Functions

13.

When this is complete, the information box will respond with the message: “Transfer

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 54 55

Keine Kommentare

AMX IRLIB Bedienungsanleitung Seite 32