AMX IRLIB Bedienungsanleitung PDF herunterladen (Seite 33)

KI-1856C Rauland RANGER

Head End—

Installation

Page 33 of 55 (Jun-98)

Accepted.” Press Esc to exit this screen.

14.

Repeat this procedure for all the

RANIR

cards,

RANCL

101

RANCL

201

RANCLASS

1s that you need to set up.

15.

When you have completed programming

cards, simultaneously press Ctrl + X to

exit the program.

Wiring

Transmitter Cables

Each

device that you are installing has a corresponding

Transmitter Cable

(

RANIRCABLE

). This cable is plugged into the top two pins of the appropriate

RANIR

card's connector. You will find these connectors on the back of

RANCC16

card cage.

Each connector is labeled with the slot number to which it corresponds.

Place the emitter portion of the

Transmitter Cable over the corresponding resource's

sensor window. When the system is completely on-line, you might have to move the

emitter around to find the proper location so that the device responds to the

signals

that the

RANIR

card is sending. Each package contains an extra double-sided stick

tape, but be careful: you get only one try for each. You may want to use scotch tape on

the IR emitter until the right spot has been confirmed.

RANIRIS Infrared Capture Unit

Many of the devices that are operated via the

RANGER

system are infrared-

controlled. In order to provide a universal operating interface for all media devices,

the

RANGER

system emulates these devices' original remote control units with the

RANIR

, an infrared control card that fits in the

RANCC

16 Control Card Cage. Each

controlled device (e.g.

RANVCR

RANCDI

-controlled laser disc player,

RANIRPC

RANVFLOP

, or

RANVSTILL

) must have a card associated with it. For

control at the classroom television, use a

RANCL101CP

RANCL201CP,

RANCLASS1

. Additionally these cards must be programmed with the appropriate

codes (usually supplied by Rauland-Borg). The

RANIRIS

is an optional external unit

that allows authorized Rauland-Borg distributors to create custom

codes to

match units with remotes that do not have codes supplied by Rauland-Borg

Corporation.

Parts Required

RANIRLIB

(software to create and download

library—not included)

1 Nine-Pin female data connector to connect from

RANIRIS

232 port to serial port on

(not included)

2293

Associated Equipment

RANPCSW

(

RANGER

Media Center computer) or other

compatible with a free

232 port (not included)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 54 55

Kommentare zu diesen Handbüchern

Keine Kommentare

AMX IRLIB Bedienungsanleitung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software AMX IRLIB